How do I power a 6VDC/12VDC/24VDC 300mA no load Motor wire leads. 4.5A Stall @ 12V ?

Using for halloween props. motor works on all 3 power cycles but not sure how to power it. Would like to run it off house current. I’m guessing i will need a converter…
Thanks for help!

You can get a 12 volt transformer from Radio Shack, Walmart, etc. You don’t need to bring it in. You have all the info you need in your question. Then you will run an extension cord to the transformer from your house. If the transformer can get wet, wrap it with a plastic grocery bag.

This entry was posted in 24vdc. Bookmark the permalink.

2 Responses to How do I power a 6VDC/12VDC/24VDC 300mA no load Motor wire leads. 4.5A Stall @ 12V ?

  1. lars_doyle says:

    Take the motor to Radio Shack and tell the clerk you need a power supply for the motor. A 12vdc power supply will probably be the most common.
    References :
    Electrical Engineer

  2. Boston Fan says:

    You can get a 12 volt transformer from Radio Shack, Walmart, etc. You don’t need to bring it in. You have all the info you need in your question. Then you will run an extension cord to the transformer from your house. If the transformer can get wet, wrap it with a plastic grocery bag.
    References :
    Master Electrician